Carbide nail drill bit Staleks, “frustum”, red, head diameter 4 mm/ working part 13 mm
Previous
Next
Carbide nail drill bit Staleks, “frustum”, red, head diameter 4 mm/ working part 13 mm

* Please note that the color of the product may slightly differ from the original due to display characteristics.

Carbide nail drill bit Staleks, “frustum”, red, head diameter 4 mm/ working part 13 mm

Staleks carbide bit is a solid-metal tool of coarse hardness designed for professional manicure and pedicure. Unlike other types of bits, carbide bits cut the material into fine shavings instead of dust, making the process cleaner and safer.

The tool is suitable for correcting natural and artificial nails, preparing for extensions, removing gel polish, and working with other dense coatings. In manicure, the bit precisely removes material and leaves a smooth surface.

Category Carbide cutters Brand STALEKS Delivery Time 2–4 days Reference 4820241066322 , FT70R040/13
19.99 €
ㅤ
Add to bag

Staleks carbide bit is a solid-metal tool of coarse hardness designed for professional manicure and pedicure. Unlike other types of bits, carbide bits cut the material into fine shavings instead of dust, making the process cleaner and safer.

The tool is suitable for correcting natural and artificial nails, preparing for extensions, removing gel polish, and working with other dense coatings. In manicure, the bit precisely removes material and leaves a smooth surface.

It is important to work with the tool gently and smoothly, avoiding abrupt movements and long exposure in one place. The maximum rotation speed is up to 18,000 rpm. Exceeding the recommended speed can cause overheating and client discomfort.

Advantages of the Staleks carbide bit:
• Purpose — professional manicure and pedicure
• Material — medical-grade stainless steel
• Service life — up to 4–6 months
• Corrosion resistance
• Compatible with all disinfection and sterilization methods
• Pack contains 1 piece

Care and sterilization:
Remove the bit immediately after use and clean dust with a soft brush. For pre-sterilization, use a soapy solution or an ultrasonic cleaner. Disinfect only with solutions effective against viruses and fungi.
• Dry heat sterilization: 180 °C — 60 min, 160 °C — 150 min
• Autoclave sterilization: 120 °C at 1.1 atm — 45 min; 132 °C at 2 atm — 20 min

Store the tool in a dry, sterile container, away from moisture and dust.

When to replace the bit:
• The working surface has lost abrasiveness or become smooth
• Chips or burrs appeared on the tip
• Removal takes longer than usual
• Vibration or overheating is felt during use
• The bit is deformed after drops or prolonged operation

Staleks carbide bit is a reliable choice for professionals who value speed, comfort, and client safety.

Shipping to Finland:
Posti: 4.97€ or free for orders over 170€
Courier to address: 15.42€

Shipping to Sweden:
Courier to address: 15.42€

Shipping to Estonia:
SmartPost: 2.99€ or free for orders over 40€

Carbide Bit – Avelia “Corn” Blue – Ø6 mm / 14.5 mm

Carbide Bit – Avelia “Corn” Blue – Ø6 mm / 14.5 mm

A carbide nail drill bit made of durable, wear-resistant tungsten carbide is designed for professional manicure and pedicure. It is suitable for removing gel polish, gel, acrylic and acrylic-gel, as well as for working on both natural and artificial nails. The bit removes material cleanly, forming shavings instead of dust, ensuring comfortable and safe work. The color-marking system helps identify the abrasiveness level:. Red ring – soft and delicate, ideal for sensitive nails, fine refinement and careful product removal.. Blue ring – medium and universal, most commonly used for standard removal of gel polish, gel, acrylic and correction work.
14.95 €
Carbide nail drill bit Staleks, “cylinder”, blue, head diameter 6 mm/ working part 14 mm

Carbide nail drill bit Staleks, “cylinder”, blue, head diameter 6 mm/ working part 14 mm

Staleks carbide bit is a solid-metal tool of coarse hardness designed for professional manicure and pedicure. Unlike other types of bits, carbide bits cut the material into fine shavings instead of dust, making the process cleaner and safer. The tool is suitable for correcting natural and artificial nails, preparing for extensions, removing gel polish, and working with other dense coatings. In manicure, the bit precisely removes material and leaves a smooth surface.
19.99 €
Carbide nail drill bit – Staleks – corn – blue – 6 mm / 14 mm

Carbide nail drill bit – Staleks – corn – blue – 6 mm / 14 mm

Staleks carbide bit is a solid-metal tool of coarse hardness designed for professional manicure and pedicure. Unlike other types of bits, carbide bits cut the material into fine shavings instead of dust, making the process cleaner and safer. The tool is suitable for correcting natural and artificial nails, preparing for extensions, removing gel polish, and working with other dense coatings. In manicure, the bit precisely removes material and leaves a smooth surface.
19.99 €
Carbide bit Avelia – Ø2 mm / 10 mm

Carbide bit Avelia – Ø2 mm / 10 mm

The Avelia carbide drill bit Ø2 mm / 10 mm is designed for precise work inside the nail and careful filing of the inner side of the free edge. The thin Ø2 mm diameter allows easy access to narrow and hard-to-reach areas, ensuring clean internal processing without the risk of damaging the natural nail plate. The 10 mm working length enables accurate correction of internal architecture, refinement of shape, and alignment of inner walls during nail extensions and modeling. The bit provides high control and precision for detailed professional work.
14.99 €
Carbide nail drill bit – Staleks – flame – red – 5 mm / 13.5 mm

Carbide nail drill bit – Staleks – flame – red – 5 mm / 13.5 mm

Staleks carbide bit is a solid-metal tool of coarse hardness designed for professional manicure and pedicure. Unlike other types of bits, carbide bits cut the material into fine shavings instead of dust, making the process cleaner and safer. The tool is suitable for correcting natural and artificial nails, preparing for extensions, removing gel polish, and working with other dense coatings. In manicure, the bit precisely removes material and leaves a smooth surface.
19.99 €
Carbide Nail Bit “Cone” Avelia – green – Ø4 mm / 14 mm

Carbide Nail Bit “Cone” Avelia – green – Ø4 mm / 14 mm

The Avelia carbide “Cone” drill bit with a green notch Ø4 mm / 14 mm is a reliable professional tool designed for removal of gel polish, gel, and acrylic, as well as for processing and correction of artificial coatings. The conical shape allows precise and safe work in hard-to-reach areas without damaging the natural nail plate. The green notch indicates a medium abrasiveness level, ideal for fast and clean material removal.
14.99 €
Previous
Next