Previous
Next

* Please note that the color of the product may slightly differ from the original due to display characteristics.

Builder Gel F.O.X Sakura 003 – 15 ml

F.O.X Sakura Builder Gel is a three-phase medium-viscosity sculpting gel designed for nail extensions and strengthening of natural nails. Its self-leveling texture ensures comfortable application and allows precise architecture building both during reinforcement and full modeling.

The formula contains delicate dried flowers that create a subtle decorative effect within the material. This gives the coating visual depth and a light, airy appearance, allowing aesthetic designs without additional nail art elements.

Out of stock
Category Builder Brand F.O.X Reference 5905358714546
11.95 €

Shall we notify you as soon as this item is back in stock?

We will notify you by email as soon as the product is available again.

The gel has a controllable consistency, spreads evenly, and is easy to work with. After curing, it maintains strength and stability, ensuring long-lasting wear of the manicure.

Benefits:

  • three-phase system for professional nail modeling and strengthening
  • self-leveling properties for comfortable application
  • medium viscosity for controlled work
  • decorative dried flowers inside the gel
  • suitable for extensions and natural nail strengthening
  • creates a soft decorative effect without additional design

Directions for use (natural nail strengthening):

  1. Prepare the nail plate, file and degrease the surface.
  2. Apply F.O.X Nail Prep and allow it to evaporate.
  3. Apply acid-free primer F.O.X Ultrabond.
  4. Apply a thin rubbing layer of base F.O.X Base / Base Power / Base Rubber / Air Base and cure.
  5. Distribute F.O.X Sakura Builder Gel, building architecture and reinforcing the nail.
  6. Cure: UV 36W — 2 minutes, LED/UV 36/48W — 60 seconds.
  7. Remove the sticky layer using F.O.X Cleanser Gel.
  8. If needed, file and apply top coat.

Directions for use (modeling):

  1. Prepare the nail plate using standard procedure.
  2. Apply F.O.X Nail Prep and F.O.X Ultrabond.
  3. Apply base layer F.O.X Base Power / Base Rubber / Air Base and cure.
  4. Build length and shape using forms, tips, or Dual Forms.
  5. Cure: UV 36W — 1 minute, LED/UV 36/48W — 30 seconds.
  6. Remove sticky layer and file the structure.
  7. Re-cure: UV 36W — 2–3 minutes, LED/UV 36/48W — 2–4 minutes depending on thickness.
  8. Finish with color or top coat from F.O.X.

Removal:

  • with electric nail drill
  • with nail file
  • Volume: 15 ml.

Shipping to Finland:
Posti: 4.97€ or free for orders over 170€
Courier to address: 15.42€

Shipping to Sweden:
Courier to address: 15.42€

Shipping to Estonia:
SmartPost: 2.99€ or free for orders over 40€